home downloads level addons screenshots mouse party  



Monarch: The Butterfly King

Editor Documentation


Welcome to the Monarch Level Editor!

Disclaimer: The Editor is NOT SUPPORTED. This means that Reflexive is not responsible for providing adequate documentation or answering questions that pertain to the Editor or its use. This also means that it may be possible for the player to create levels that don’t work correctly, seem broken, or don’t do what the creator envisioned them doing. Reflexive Entertainment is not responsible for assisting designers create their levels, or “fix” features that work fine in the shipped game but might not in some extreme condition found by a player using the Editor.

In addition, the Monarch engine is an advancment on the engine that Reflexive used for one of their previous games, Big Kahuna Reef 2. This is why there is an abundance of underwater items in the Level Editor.



Please choose from among the following categories below:

The Level Editor

Quick Start

How To Create A Level Set

Editing Levels

            Editing a Tile

            Edit Level Properties

Editing Level Sets

            Selecting Butterflies To Unlock

Inserting A Decal
Editing Decorations

            Selection of Multiple Decorations

Rotating a Decoration

Changing Size of Decorations

Grouping Selected Decorations

Changing the Decoration's Order

Other Decoration Editing

Moving the Board

Sharing Your Level Set

Shortcut Keys





Level Editor

The Level Editor for Monarch can be used to make your own levels.

The Editor can be reached through the “Options” menu. The first time that you enter the editor, there will be a message that pops up that gives you very basic instructions on what to do first. You will also have to type in the word “unsupported”. This is to further drive the point home that this is an unsupported level editor.


To exit the Level Editor, pull down the file menu and select “Exit” or hit the <ESC> key on the keyboard.


NOTE: Probaby the COOLEST feature of the Editor is the "UNDO" feature. Most actions can simply be "undone" by clicking on the Undo button in the Editor Pull-Down Menu. There are some things, like deleting a level, that cannot be undone, so try and be careful what you delete!

Shortcut Key: Pressing "<Ctrl>" and the "Z" keys at the same time will undo your last event in the editor.



Quick Start

This is intended to get you creating levels as quickly as possible!

Creating Your Level Set

  1. From the Main Menu, Select “Options”. Then, Select “Level Editor”
  2. On the window that appears, Select “New” at the bottom of the screen
  3. Type in a unique name in the window that appears and then press “Save”. Funny names are OK!
  4. Click on the name of the level you just created in the window and press the “Select” button.
  5. A window will appear (if this is your first time in the level editor) that explains how the level editor is unsupported. Please read the short description and type in “unsupported” where prompted. A tutorial window will then pop up that explains a few basics. Please read it and then click on “Continue”.
Editing Your First Level
  1. The next screen that appears is the first level of your new level set.
  2. If you want to put more boxes on the screen, RIGHT CLICK where there is NOT a box to put one there. If you want to remove a box, RIGHT CLICK where there IS a box and it will remove it.
  3. Do this until you like the way it looks. Then, on the small Editor Box, click on the word “File” and then on the word “Exit” that pops up.
  4. You will then be playing your level! You will notice ugly text all over your level telling you that it is untested. These go away when you complete the level.
  5. If you like your level, great! Go ahead and finish it and go to the next one. If you DON’T like your level, you can edit it before you finish it by pressing the <F6> key anytime during play to go back into the Editor. (<F6> is typically on the top row of keys on your keyboard)
Editing Other Levels
  1. Inside the Editor, you can go from one level to the next by clicking on the “<” and “>” keys on the Editor Box. Then just do the same steps as before.
Sharing Your Levels
  1. Once you have played through every level, congratulations! Not only have you played levels that YOU created, you can now share these levels with others, if you wish. Go to Sharing Your Level Set below to find out more.


NOTE: In the Editor, you can double click on any box to see more attributes of the box. Feel free to play around with this stuff.




How To Create A Level Set

Before you can edit a level you must create your own Level Set.


Creating Your FIRST Level Set

1)      Select “Options” on the Main Menu.

2)      Then Select “Level Editor” to enter the Level Editor.

3)      On the window that appears, select “New” at the bottom of the screen.

4)      In the window that pops up, type in a unique name for your level set, then press “Save”

5)      The name of the Level Set will appear in the list. Select it in the list and hit the “Select” button to go right to it. That’s it!


Creating SUBSEQUENT Level Sets

1.       From within the Editor, pull down the file menu and use the "Select / Create Level Set" option.

2.       You will then see a window with a list of current Level Sets. Proceed as before.



Editing Levels

(To make your own levels, first create your own Level Set. Look at How To Create A Level Set for help)

All steps below assume that you are already in the Level Editor


·         Placing/Removing Boxes: RIGHT click with your mouse on an empty space on the board to place a Box. RIGHT click with your mouse on a space with a tile to remove the Box.
Shortcut Key: Holding the RIGHT mouse button and moving your mouse around will allow you to quickly add or remove Boxes.

·         Inserting/Removing Rows or Columns of Boxes: Select any game box on the Board where you would like to insert or delete the column/row. Then, select the “Tile” Menu option on the Editor Box. The available options will appear, including Delete Row, Insert Row Before, Delete Column and Insert Column Before. There is no “Undo” button, so you may want to experiment with this feature on boards you don’t care too much about first.

Shortcut Keys: Delete Row is 8.  Insert Row Before is 2.  Delete Column is 4.  Insert Column Before is 6. These numbers are meant to correspond to the numeric keypad on the right hand side of most keyboards.

Editing A Tile

Double click on any box on the board to bring up the tile edit window.

§         “Has Been Completed”: This box unchecked means that the box needs to be broken. This box checked means that the box starts off without a box behind it to break.

Shortcut Key: Pressing the “c” key with a tile selected will toggle between completed and uncompleted.

§         “Is Playable”: This box checked means that a box will appear in this tile section. This box unchecked means that no box will appear here.

Shortcut Key: Right Clicking on a tile will toggle between Playable and Not Playable.

§         “Locked”: Next to the word “Locked” is a number value with an “up and down” arrow next to it. Enter a value of “1” here to make a single lock on the box, and two for a double lock. The graphic for a locked piece can only distinguish between a single lock, a double lock and a triple lock. If you enter 3 or more, the tile will look like a triple lock, but will take that many matches to break.

Shortcut Key: Pressing your middle mouse button with a tile selected will toggle between a single lock facing to the right, a single lock facing to the left, a double lock, and no lock at all, provided you have a 3 button mouse and it is configured in Windows to function in this manner.

·         “Alternative Lock Angle”: When the “Locked” value is “1”, this will show the lock chain going in the other direction, for visual aesthetics. This checkbox only affects the tile when the Locked value is set to 1.

·         Tile Editing, ADVANCED:  Within the tile edit window is a tab called “Advanced”.

§         “Tile Style”: If you want a particular piece or POTION to be on a tile before the level begins, you can select it from this list. There are a few things to remember:

1.       Pieces will fall if there are empty spots below them to fall into and will not stay on that tile they were created on unless there is no place for them to fall to OR they are locked in place.

2.       Placing three of the same shape right next to each other BEFORE the level starts will not work. The level will automatically change the pieces that are spawned to prevent any automatic matches from occurring.

§         “Background Image”: This allows you to have the tile display an art image in the game. Some art images that can be displayed using this may not display themselves well in relation to the tile, and/or may not look good in the game in general. This setting does not work by default unless the “Auto Calculate Corners” checkbox has been unchecked in the Level Editing Properties. 

·         AWESOME Tile Editing Shortcut: If there is any tile that you want to make more of, simply left click on that tile, press “Ctrl” and “C” and then “Ctrl” and “V” where you want to make an exact copy of that tile. This can really save you time.


Edit Level Properties

Left click on the “Edit Level Properties” button on the Editor Box. On the window that pops up, you can enter:

§         “Name”: The level name. This will pop up when the level is played.

§         “Credits”: Your name.

§         “Comment”: Only seen by you in the editor when looking at your levels in the editor, but it can also be seen by others that look at your level in the level editor.

§         “Time to play”:  used in Timed Mode to determine how long the level can be played before time runs out.

§         “Requires Double Completion”: This checkbox makes the boxes on the screen take two hits to complete. When unchecked, all boxes on the level takes one hit to complete.

§         “Has Undo Piece”: When checked, this will put the the Frog into the mix for the pieces that will get created on the level.

§         “Background”: This tells the game what background image to use on a particular level. We recommend leaving it on “Any” (the default value) so that backgrounds will change, and will not repeat, as the levels progress.

§         “Background Color”: This is a field that does nothing in the editor.

§         Level Properties, ADVANCED. Within the level properties is a tab called “Advanced”.

o        “Auto Calculate Spawn Points” is checked by default. It automatically creates spots from where pieces can fall. While we wouldn’t recommend it, you can modify which pieces spawn pieces by un-checking this box and then going out to your level and pressing “s” on each selected tile to make it a spawn point. Press “s” on it again to not make it a spawn point.

o        “Auto Calculate Corners”, when checked, will create decorations on the board that surround the boxes. If you have a single hit board of wooden boxes, it will create wooden decorations on the edges to make the board look better. It creates metal decorations when you have a metal double completion board. When unchecked, you have the ability to draw these in yourself. With it unchecked, left-select any box and then use your mouse wheel to cycle between these images. WARNING: If you go back and check this box, it will undo all of your work and recalculate the corners again. There is no undo.

§         TRICK: If you want to only place some of the corners that look best, but not others, make sure the Auto Calculate Corners box is unchecked, select the box, then go to the “Tile” pull-down menu on the Level Editor screen and select “Auto Set Background for Selected Tile”. This will place the “best” corner fit for that tile. You can then use the mouse wheel to select a slightly different one, if you wish.

Shortcut Key: Pressing the “b” key with a tile selected will also place a corner, provided that the Auto Calculate Corners has been turned off for the level.

§         Side Note: The "auto calculate corners" feature will set the tile background to the default type of corner, but you can also change it to the alternate corner type without turning off auto calculate corners. Just click on the non-playable tile you want to change and then roll the mouse wheel. This is how you add the "outside corners" to your board and how you change from the small curve to the big diagonal line for the stair step type corners. But the mouse wheel won’t let you put non-corner images in the background of a tile unless you uncheck the auto calculate corners option.


o        “Clear Power-up Enabled” allows the Flower Popper to be on a level when checked, and disallows it when unchecked. While we don’t recommend taking out the Flower Popper, please feel free to experiment as you see fit.


·         Board, Decorations and Editing Checkboxes: The “Show Board” and “Show Decorations” checkboxes will toggle whether these show up in the Editor or not, but do nothing for how they will show up when playing the game. The “Shape Editing” checkbox will allow you to edit any Line Art shapes that are selected. (See Drawing Shapes for more information with Line Art)



Level Facts

·         The “S” letter on some boxes on a level represents where pieces will get spawned when a match has been created and more pieces come onto the screen.

·         When a new level gets created, a message will appear on the screen to indicate that the level has not been tested. This message will go away when it has been completed. In addition, this message will appear on a previously tested level if any changes to the level are made.

·         Shortcut Key: Pressing the <F6> key will enter and exit the editor on your own Level Set or Level Sets downloaded from the Internet. This will NOT work on the Level Sets that shipped with the game.




Editing Level Sets

These are the important features and functions when modifying the Levels within your Level Set.

These features can be accessed from the Editor by clicking on “Edit” and then “Edit Level Set”

·         Properties: The “Properties” button will take you to a window where you can enter the Description and Author of the level set. Both a Description and an Author Name will have to be entered for the set to be published online. If you don’t wish to publish your set online, do not worry about typing in this informaton. Also, you can left click on the "Edit Level Set Properties" button on the Editor Box to quickly modify this information.

        • Remember: If you wish to have your set online on the Monarch site, you will need to enter a description and an author name.

·         Edit Button: Allows you to go to a specific level in a set. Simply select the desired level you wish to go to and click the “Edit” button (you can double click on a level to go there as well). To go to a level from outside of the Edit Level Set window, use the “<” and “>” buttons on the tool bar.
Shortcut Key: You can also change the level that is highlighted in the window by using the up and down arrows on the keyboard.

·         “Move Up” and “Move Down” Buttons:  Used to change the order of the levels in a set. Click to select the level you want to move and use these buttons to change its position in the list.
Shortcut Key: You can also hold down shift and use the up and down arrow keys (shift-up arrow and shift-down arrow) on the keyboard to move a highlighted level in the list.

·         Insert Button: Will insert a new “Template” level before the one that is highlighted. If you want the new level to be at the bottom of the list you will have to insert it and then move it down to the bottom.

·         Delete Button:  Used to delete the highlighted level. You will not be able to delete a level that is the current level being edited (you must change to a different level first as explained above and then delete the desired level from the Edit Level Set window).

WARNING: There is no confirmation window that will come up to ask if you are sure you want to delete a level, so be careful. You will NOT be able to retrieve a deleted level.

·         Copy Button:  Stores a copy of the highlighted level. You can then use the “Paste” button to paste the level in the list. This is useful if you want to make a board that is a variation of another one you have in your set. When you paste the level it will go before the highlighted level just as insert would.

·         Copy All Button:  Can be used to store a copy of all the levels in your set. When you then use “Paste” it will put duplicates of all the levels in the set.

·         Select Butterflies Button: This is cool. This allows the designer to decide what Butterflies are “unlocked” during the course of playing the level. On the screen that pops up, there are two columns, “Available Butterflies” and “Butterflies In Your Level Set”, and a series of buttons in the middle.

Selecting Butterflies To Unlock

1.       Simply click on a Butterfly in the “Available Butterflies” column and click the “Add” button to add it to your list.

2.       If you add one that you do not want, select it and then click the “Remove” button. Add butterflies to the “Butterflies In Your Level Set” until you have the butterflies in your list that you want to have on your level.

3.       Then, put the butterflies in the order that you want to unlock them by selecting a butterfly and then using the “Move Up” and “Move Down” buttons. The top of the list represents the first butterfly to get unlocked and the bottom is the last.

4.      Butterfly FACTS:

o        Make sure your list contains AT LEAST 2 butterflies. This is because the first one in the list will start off “unlocked” and there needs to be at least one other butterfly to get “unlocked” during the game.

o        The game will automatically space out the number of levels that have to be completed to unlock a butterfly.

§         Example 1: If you have 10 butterflies in the list, and 10 levels, 3 will start out “unlocked” and the other 7 will be unlocked as you play the Level Set.

§         Example 2: If you have 15 butterflies in the list, and 10 levels, 6 will start out “unlocked” and the other 9 will be unlocked after the first 9 levels in the Level Set are completed. (The last level in the Level Set doesn’t unlock a butterfly)


Inserting A Decal

Decals are art objects that can be inserted into the level.


·         From the Editor screen, click on “Decorations”.

·         On the Menu that expands, click on “New Decal”.
Shortcut Key: Pressing “E” will create a new decal.

·         An object should appear on the level. It is possible that it was created behind the boxes on the level. It will show up as a simple white outline behind the boxes if this has happened. Click on it to select it and then move it to the side of the existing boxes on the board.

·         Double left click on the Decal to open its property window. There are many things you can modify:

      • To Change The Image: There is a field called “Image”. Press the Pull Down Arrow next to this field. (It looks like a small triangle with the point turned downward). Select any object in the list to see what it looks like.
      • Mirror Checkbox: This makes the image look slightly different, depending upon what image is being used. Try it.
      • Scale X and Scale Y: Scale X will increase or decrease the scale of the image the left and right. Scale Y will increase or decrease the scale of the image up and down. The image will definitely look its best when both of these numbers are the same.
      • Rotation: Rotates the image to a different angle.

·         Modifying The Decal Colors

§         To the FAR RIGHT of a list of 4 values, each followed by a number (R,G,B,A), there is a colored square. Click on the colored square.

§         Another window will appear that is filled with colors. Click anywhere on the colors to change the color of the object to match, then close the window.

§         The “A” value (or Alpha) has a number to the right of it. Think of this as the transparency. The lower the number, the more transparent the object is.


Editing Decorations

Both Shapes and Decals belong to the group called “Decorations”. Shapes and Decals can both be easily manipulated to fit into your design.



·            Click on a place that does not have a decoration.

·            HOLDING the mouse button down, drag the mouse over the decorations you want to select. (You will see the selected Shapes will start to glow, and the selected Decals will have a white box around them.
Shortcut Key: HOLDING the “CTRL” key and clicking on decorations will add the decoration to the selected decorations

·            You can now drag the selected decorations around together.



·            Select a decoration or group of decorations that you wish to rotate.

·            Provided you are using a mouse with a center scroll wheel, scroll the wheel forward to rotate the decoration Clockwise, or backwards to rotate Counter-Clockwise.



·            Select a decoration or group of decorations that you wish to change the size of.

·            Provided you are using a mouse with a center scroll wheel, hold “Ctrl” and scroll the wheel forward to enlarge, or backwards to shrink



·            Select multiple decorations that you wish to group together.

·            On the Menu that expands, click on “Group Selected Decorations”.
Shortcut Key: Pressing “G” will group selected decorations.

·            Decoration groups will be selected if you click on any one of the decorations that you have grouped together.

·            Moving a decoration group will move all the decorations together.

·             To Ungroup a group of decorations, on the Menu that expands, click on “Ungroup Selected Group”.  They will now be ungrouped and selected.
Shortcut Key: Pressing “U” will ungroup selected groups.



·            Select a Decoration or Group of Decorations that you want to duplicate.

·            On the Decorations Menu that expands, click on “Copy Decoration Style”
Shortcut Key: Pressing “Ctrl” + “C” will copy the Decoration or Group of Decorations

·            Move your cursor to wherever you would like to copy the objects to, whether that is another spot on the same level, or another level entirely.

Shortcut Key: Pressing “Ctrl” + “V” will paste the copied Decoration or Group of Decorations



·            To change the order that decorations overlap each other, Make sure the “Shape Editing” checkbox is unchecked.

·            Select the decoration that you wish to edit.

·            On the Menu that expands, click on one of the following options:

§         Select “Bring Forward” to move the decoration one step closer to the top.
Shortcut Key: Pressing “Page Up” will bring the decoration forward.

§         Select “Bring To Front” to move the decoration to the top of all other decorations.

§         Shortcut Key: Pressing “Home” will bring the decoration to the front.

§         Select “Send To Back” to move the decoration behind all other decorations.

§         Shortcut Key: Pressing “End” will send the decoration to the back.

§         Select “Send Backward” to move the decoration one step closer to the back.

§         Shortcut Key: Pressing “Page Down” will send the decoration backwards.


Other Decoration Editing

(All of these editing commands are found on the Decorations Menu)

·         “Flip Horizontally (Mirror)”: With a Decoration or group of Decorations selected, selecting this will flip the object around the Y-axis. This will make the object look like it has been viewed through a mirror. To get the object or group of objects back to their original look, simply Flip them again.

Shortcut Key: Pressing “F” with the Decoration(s) selected will horizontally flip the selected Decoration(s).

·         “Flip Vertically”: With a Decoration or group of Decorations selected, selecting this will flip the object around the X-axis. To get the object or group of objects back to their original look, simply Flip them again.

·         “Hide Decoration”: Select a Decoration and then click on “Hide Decoration” to make the object not appear IN THE EDITOR ONLY. This is useful for moving around numerous decorations that overlap, or when you want to sure that you don’t select a decoration with a bunch of other decorations in a group select.

·         “Show All Decorations”: Makes all previously hidden Decorations appear.

·         “Select All Decorations”: Selects all of the Decorations on a level. Useful for group copying, shrinking, etc.



Moving the Board

You may wish to move the board to the left, or up or down…or whatever. There are arrows on the level editing screen window that allow you to do this quickly and easily. If you hover over them, they will display hover text of “Move Board Up”, “Move Board Right”, “Move Board Left” and “Move Board Down”. Clicking on these buttons will cause the board and all the decorations on the level to move in that direction, unless it is not possible to move the board in that direction. If the button is grayed out and does not display hover text, that means that the board is already as far over that direction as it can go and it will not be possible to move the board in that direction. If you are dead set in moving the board in that direction, and the button is grayed out, you may have to delete rows and/or columns of your level to get the rest of the level where you want it to go.


In addition, using these buttons allows you to move the board in “half tile” increments. That means when the corresponding direction button is pressed, the entire board will move half a tile’s width in that direction. This can be used to center the board manually, or just plain put the board where you want it.



Sharing Your Level Set

You will need to play all of the levels in your set and make sure you see a “yes” in the “Tested” field next to each level before submitting the Level Set to Reflexive. There is also a large message on the level screen itself that will indicate that the level is untested. If it’s not there, it has been played through to the end. Any changes to the Level AFTER playing the Level may change the status from “yes” to “NO” and the text will reappear on the level. A Level Set that has a “NO” in any of the “Tested” fields on any level will not be put up on the Monarch website.

When you are finished creating your round set, please submit it to us for others to enjoy!

Please Note: All submissions become the property of Reflexive Entertainment and will be eligible for inclusion in all Reflexive Entertainment media. This means that we can share your levels with other gamers on the Web, in retail materials, and in any other way. Thanks!

Visit MonarchButterflyKing.com for more information and to download other user made levels.


Shortcut Keys

·         “ ` ”: Opens “Edit Level Set”.

·         “Esc”: Exits editor.

·         “F6”: Enters/Exits editor.

·         “2”: “Insert Row” between Boxes.

·         “4”: “Delete Column” of Boxes.

·         “6”: “Insert Column” between Boxes.

·         “8”: “Delete Row” of Boxes.

·         “A”

o        With “Shape Editing” checkbox UNCHECKED: “Select All Decorations”.

o        With “Shape Editing” checkbox CHECKED: “Select All Points” of a selected Shape.

·         “D”: Toggles “Show Decorations”.

·         “E”: Creates a “New Decal”.

·         “F”: Horizontally Flips (Mirrors) selected Decoration(s).

·         “H”

o        With “Shape Editing” checkbox UNCHECKED: “Hide Decoration”.

o        With “Shape Editing” checkbox CHECKED: “Flip Horizontally”.

·         “L”: With “Shape Editing” checkbox CHECKED: “Smart Align”.

·         “M”: Opens “Edit Level Properties”.

·         “N”: Creates a “New Shape”.

·         “O”: Toggles “Show Board”.

·         “P”: Toggles “Shape Editing”.

·         “R”: With “Shape Editing” checkbox CHECKED: “Rotate”.

·         “S”: “Show All Decorations”.

·         “T”: “Paste Decoration Style”.

·         “V”: With “Shape Editing” checkbox CHECKED: “Flip Vertically”.

·         “Ctrl” + “C”: Copies a selected decoration or group and copies the decoration’s style.

(<Ctrl> + <C> copies the selected tile if a decoration is not selected)

·         “Ctrl” + “V”: Pastes a copied decoration or group.

(<Ctrl> + <V> can also paste the copied tile onto the selected tile)

·         “Ctrl” + “X”: Cuts a selected decoration or group.

·         “Page Up”: “Bring Forward”

·         “Page Down”: “Send Backward”

·         “Home”: “Bring To Front”

·         “End”: “Send To Back”

·          “+”: With “Shape Editing” checkbox CHECKED: “Scale Up”.

·         “-“: With “Shape Editing” checkbox CHECKED: “Scale Down”.

·         “>”:With “Shape Editing” checkbox CHECKED: “Increase Curve Order”.

·         “<”:With “Shape Editing” checkbox CHECKED: “Decrease Curve Order”.

·         “Tab”: With “Shape Editing” checkbox CHECKED: Selects next point in a Shape.

·         “Del”: “Delete Decoration”

WARNING: There is no confirmation window that will come up to ask if you are sure you want to delete a decoration or group of decorations, so be careful. You will NOT be able to retrieve a deleted decoration.





Plates – Places on the board that are either made out of metal or bronzed metal. All of these need to be removed to complete the level. Plates also have a piece on top of them that can be used to make a match of 3 or more.

Decal – Art objects that can be inserted into the level to personalize the level.

Editor Box – The spot on the Editor Screen where the editor functions can be accessed. The Editor Box can be moved around the screen, and has pull-down menus as well as buttons and checkboxes for accessing editor functionality.

Level – The game screen where the player makes matches.

Level Set – A collection of Levels or Boards is called a Level Set. Monarch has two “Main” Level Sets: The Butterfly Kingdom Level Set is what the player starts off playing, and the Secret Garden Level Set that gets unlocked when the Butterfly Kingdom Level Set has been completed. In addition there are lots of other level sets in the Other Gardens area to enjoy.

Line Art – The images that the designers draw to enhance or personalize their levels. These images can be of different sizes, shapes, colors and even textures to really look like just about anything that the designer can imagine.

My Butterfly Screen – Where the player can see the butterflies that they have “unlocked” during the game.

Shortcut Keys – This is the fast way to access features and actions inside the Level Editor by simply pressing one key. Many actions have them. If an action has it, the Shortcut Key will be underlined. They will either be highlighted after the action (such as “Delete Row ( 8 )” where 8 is the Shortcut Key), or will simply be an underlined letter in the word itself (such as “New Shape” where “N” is the Shortcut Key)

Reflexive Entertainment – The developers of Monarch, and other games such as Big Kahuna Reef, Wik, Ricochet Xtreme and many other interesting products. They can be found at www.reflexive.net and are fond of shameless plugs for themselves and their website, regardless of alphabetical sorting. Even using and reusing old jokes until they are not funny anymore is not beneath them.